- #Samsung dvr cannot access menu to set clock hdm software#
- #Samsung dvr cannot access menu to set clock hdm Pc#
- #Samsung dvr cannot access menu to set clock hdm tv#
Using AMD Radeon software I went into Home then select the settings gear icon and then select display and then disable GPU scaling.
#Samsung dvr cannot access menu to set clock hdm Pc#
I tested the theory of a possible fix, that would only be available to a PC with a GPU control app like NVIDIA Control Panel or AMD Radeon software that allows creation of custom resolutions and especially Option to change scaling from application to GPU usually under the HDMI or Flat monitor options.
The DVI to DVI cables I have, are missing either the 4 pins that box the blade pin or they are missing the center 2 columns of pins and the 4 pins that box the blade pin. Specifically, My DVI to VGA adapter has the 3 rows of pins with the one side blade pin boxed in by 4 pins. The problem seems to be due to how different Syncmaster monitors handle the slightly modified communication due to use of DVI to VGA adapter. Additionally, I seem to remember a DVI connector I had with 3 rows of pins and 2 flat blade pins at 90 degrees from each other. The fourth DVI connector was an antique with 4 rows of pins and no flat blade connector. The third DVI cable had 3 rows of pins with a flat blade pin on one side with 4 pins boxing in the flat blade pin. The second DVI cable had 2 sets of 3 rows with the middle 2 columns of pins missing and a flat blade pin on one side. One DVI had 3 rows of pins and a flat blade pin on one side. I did notice variations in my DVI cables, even though they all had the same logo markings. I tried all the way to 1920 by 1080 successfully without Optimum resolution notice (monitor and GPU only can go to 1280 x 1024 max). Syncmaster B1940 never displays the optimal resolution notice including when you exceed the max resolution of both the monitor and GPU by creating a custom resolution. This model works with all connector configurations, IE: DVI to DVI, VGA to VGA, HDMI to HDMI, And DVI to VGA Adapter and VGA from adapter to monitor.
Syncmaster b2030 only displays optimum resolution notice if you exceed the optimum resolution. The OS, GPU, or HDMI cable are not related to this, except for the HDMI cable which must be a special high speed designation for 4K display or will not do 2160p. With a DVI to DVI or VGA to VGA it only reports Optimum Resolution notice if you exceed the optimum resolution. Syncmaster 2033 has the problem when using a DVI to VGA adapter on the PC and a VGA cable from adapter to monitor, occurring every time you turn monitor on or bring it out of sleep regardless of what the resolution is set at. This is an issue with all the Syncmaster models newer than b2030. The workaround solution of hitting the Menu or OCR button on the side or bottom right of the monitor for an instant, shuts the Optimum Resolution message off until the next time you turn it on. I found some partial solutions and or workarounds. Your interface will now appear and you can use your DVR freely.I have 5 Syncmaster monitors and I have found this issue very troubling with 3 out of 5. Don’t forget to change the input to HDMI on a TV.
#Samsung dvr cannot access menu to set clock hdm tv#
0 kommentar(er)
